Please read the questions bellow and if you cannot find your answer, please send us your question, we will answer as soon as possible
What are my responsibilities prior to installation of building?

Customer is expected to perform due diligence before their structure is ordered. It is the sole responsibility of the customer to check for permits or restrictions regarding installation of the product. Lead times are only projections, not guarantees. ALL refunds are non-refundable after 7 days, no exceptions.

Why should I consider a vertical roof versus a horizontal roof in my metal building?

The maximum length of a horizontal panel in most area is 31′. Any carport or building over 31′ in those area will have two panels seamed. This does have the possibility of leaking in the future. Also as explained on sections of the website, the ridges of the steel panels in a horizontal roof run parallel to the sides and ridge of the carport or garage. Water, snow, etc., will drain to the front and back of the building, towards the door openings. If the building is perfectly level, water will tend to pool on a horizontally installed roof. On a vertical roof, the ridges of the steel panels run from the top of the carport or garage to the sides. This roof configuration displaces water, snow, etc., much more efficiently, and water will not pool on the roof. You receive a 20 Year Limited Rust Thru Warranty On All Lengths Of Vertical Roof Style Metal Carports & Metal Buildings, but on Horizontal Roofs Only Up To 31′ long are covered under the warranty. Please call us at (228) 369-5033 for more information.

How long before my product is installed?

Delivery and installation should be within 2 to 6 weeks from time of order in almost all cases. Certain times of the year and in some locations installation could be as long as 10 weeks. This is why only a small portion of the sales price, (10% – $595.00 to $1,999.00, 12% – $2.000.00 to $3,999.00. and 15% – $4,000.00 and up), and no sales tax is required to order. The balance, (85% to 90% of the sales price, plus the sales tax), is only paid when the work has been completed and your product has been installed. Call before you order and we can find out if there are any delays in your area.

What roof styles are available?

The Regular Style, (Standard Rolled-Corner Type), and the Boxed Eave Style, (or A-Frame Type), both come standard with the Horizontal Roof Design. The Boxed Eave Style can also be built with the Vertical Roof Design. Each style can be constructed with either the 14 Gauge or 12 Gauge Frame. The ridges of the steel panels in a Horizontal Roof design run parallel to the sides of the carport or building. On a Vertical Roof Design, the ridges of the steel panels run from the top of the carport or building to the sides. Both Styles and Roof Types can also serve as the metal frame for any Full or Partial Wall Enclosure, or almost any type of custom job you may require. We strongly recommend the Vertical Roof Design on all structures over 31 Ft. long.

Regular Roof Syle
Boxed Eave Roof Style
Vertical Roof Style